Read More

Burn Off Ovens - Model 3144-RT

The ACE burn off Oven Model 3144 RT is an industrial heat cleaning oven used to clean hydrocarbon coatings such as grease, epoxy, paint, and other combustible materials from metal products. The ovens are equipped with the most advanced automatic controls, which help maximize efficiency and productivity. This oven is made from sturdy 11 gauge steel, and painted with an anti-corrosive coating of blue enamel paint. This oven has automatic, self-adjusting One Touch Control System (OTC), which ensures right part processing. This helps the user to concentrate on other tasks. Armature Coil Equipment can design this oven to meet UL, FM, ISO, and NFPA regulations.


For more details, please peruse the specification tables given below.

Component Specifications
Inside Dimensions W/O Cart 48'W X 108"D X 60"H
Inside Dimensions With Cart 48"W X 108"D X 45"H
Volume Over Cart 135 CU. FT.
Single Platform Cart Dimensions 45"W X 105"D X 15'H
Outside Dimensions 66"W 143"D X 73"H
Shipping Weight 4,000 LBS.
Location of Controls Right Side
Location of Exhaust Stack Top Rear Left Corner
Exhaust Stack I.D 18"
Exhaust Stack O.D 16"


Component Specifications
Primary Burner – Normal 800°F (427°C)
Afterburner - Before Primary Ignites 1,400°F (742°C)
Over Temp. Control Standard
Primary Water Spray Standard
Secondary Water Spray Standard
NFPA-86A Specifications Standard
FM/IRI Specifications Optional OA-2600
Primary Burner off on Loss of A.B. Standard
Primary & A.B. Burners Rated For 800,000 BTU/HR
Automatic Shutoff System Standard
One Touch Control (OTC) System Optional
High Fire Afterburner 1,500°F(798°C) Optional


Component Specifications
Cart Rating 4,800 LBS.
Cart 3" Structural Channel 5 LBS/FT
Oven Steel Enclosure 11 Ga. CRS
Oven Enclosure Front Face 1/4" CRS Plate
Angle Iron Reinforced Enclosure Standard
Blanket Insulation 4" Thick 2,300°F. Standard
Aluminized Coating Inside Enclosure Standard
Steel Floor Covers Over 4" Insulation 3/16" CRS
Exterior Finish Hi-Temp. Blue Enamel
Exhaust Stack Insulation Rated 2,700°F. 2" Thick
1 Top Mounted Pressure Relief Hatch 12.00 Sq. Ft.
Oven Volume 180 Cu. Ft. 1:15.00 Vent Ratio
Qty. Primary Water Nozzles 4 Standard
Qty. Secondary Water Nozzles 3 Standard
Qty. Primary Burners 1 Standard
Qty. Afterburners 1 Standard
NFPA Preferred Vent Ratio 1:15


Cycle Time/Capacity
Component Specifications
*Normal Cycle Time 2 to 8 Hours
*Combustible Capacity 40 LBS/HR
Sr. No. Electric Water Fuel
Component Specifications Component Specifications Component Specifications
1 Voltage/Phase/Hertz 120/1/60 Normal Less Than 3.6 Gal/HR. Max Primary Burner Hi-Fire Input 100,000 BTU/HR
2 Amps * 5 to 10 Capacity 6 Gal./HR. Ea. Nozzle Max Afterburner Hi-Fire Input 425,000 BTU/HR
3     Min/Max Pressure 30 to 60 PSI Max Afterburner Input 500,000 BTU/HR
4         Avg. Prim & After Total Hi-Lo Input Natural Gas Inlet Pressure 8" to 14" W.C.
5         Propane Inlet Pressure 12" to 18" W.C.
6         Gas Inlet Pipe Size 1"

*ACE provides a 1 year warranty from the date of sale to repair, or replacement any defective part. The warranty is applicable only if the oven is installed, maintained, and operated as per the ACE’s recommendations. Any deviation from recommended installations may result in changes to the above-mentioned date.