"I have owned a number of ovens over the years, including a few of your competitors. The ACE system is More Durable And Dependable...great performance...more energy efficient and much better temperature control"
"You make a really good oven. It is very durable. We had a few ovens that we did No Maintenance On For 10 Years and they still run well. Very rugged and dependable."
"Your oven system works great! We use it to burn oils off parts before we weld. We just purchased our second oven because we were so pleased with the first one. Very happy with the service level after the sale."
"Really good equipment. We Have Both Coil Winding Equipment and Ovens and are really pleased with both. Your inside support is excellent."
"Uses 8-10 times per month to clean wood finishes from hooks. No problems. "We recommended the oven to several other La-Z-Boy plants"
"We are very happy with the ACE system. We have used other brands and found the ACE Oven To Be Superior in performance and durability"
"Works like a charm. We even strip plastic from our steel parts. This is our second oven. The first one lasted over 20 years."
"The oven is working very well"
"Great Performance of Hybrid Radiant Tube Oven"
The ACE Burn Off oven model 230-RT is one of the popular products within the Radiant Tube oven range. The oven is specifically designed for parts cleaning and de-coating. It consists of burners, which are capable of reaching temperatures over 1000°F. These temperatures ensure that the parts are cleaned thoroughly, and all contaminant are eliminated.
The oven comprises a full steel construction, with an aluminum coating in the interior for protection. Additionally, the oven also consists of a 4” thick blanket insulation, which provides protection up to 2300°F. High pressure water nozzle systems help extinguish the flames, and quickly cool down the oven.
Detailed technical specifications of this model can be found in the tables below.
|Inside Dimensions W/O Cart||36ʺ W x 36ʺ D x 47ʺ H|
|Inside Dimensions With Cart||36ʺ W x 36ʺ D x 33ʺ H|
|Volume Over Cart||25 CU. FT.|
|Single Platform Cart Dimensions||33ʺ W x 33ʺ D x 14ʺ H|
|Outside Dimensions||56ʺ W x 64ʺ D x 58ʺ H|
|Shipping Weight||2,000 LBS.|
|Location of Controls||Right Side|
|Location of Exhaust Stack||Top Rear Left Corner|
|Exhaust Stack||10ʺ ID x 10ʹ Included|
|Exhaust Stack||14ʺ OD x 10ʹ Included|
|Primary Burner - Normal||800° F (427° C)|
|Afterburner - Before Primary Ignites||1,400° F (742° C)|
|Over Temp. Control||Standard|
|Primary Water Spray||Standard|
|Secondary Water Spray||Standard|
|FM Specifications||Optional OA-2600|
|U.L. Listed Control Panel||Standard|
|ISO Control Certified||Standard|
|Primary Burner off on Loss of A.B.||Standard|
|* Primary & A.B. Burners Rated For||800,000 BTU/HR|
|Automatic Shutoff System||Standard|
|One Touch Control (OTC) System||Optional|
|High Fire Afterburner 1,500° F (798° C)||Optional|
|Cart Rating||3,200 LBS.|
|Cart 3ʺ Structural Channel||5 LBS/FT|
|Oven Steel Enclosure||11 Ga. CRS|
|Oven Enclosure Front Face||1/4ʺ CRS Plate|
|Angle Iron Reinforced Enclosure||Standard|
|Blanket Insulation 4ʺ Thick 2,300° F||Standard|
|Aluminized Coating Inside Enclosure||Standard|
|Steel Floor Covers Over 4ʺ Insulation||3/16ʺ CRS|
|Exterior Finish Hi-Temp.||Blue Enamel|
|Exhaust Stack Insulation Rated||2,700° F. 2ʺ Thick|
|1 Top Mounted Pressure Relief Hatch||3.67 SQ. FT|
|Oven Volume 35.25 CU. FT.||1:9.6 Vent Ratio|
|Qty. Primary Water Nozzles||2, Standard|
|Qty. Secondary Water Nozzles||2, Standard|
|Qty. Primary Burners||1, Standard|
|Qty. Afterburners||1, Standard|
|NFPA Preferred Vent Ratio||1:15|
|* Normal Cycle Time||2 to 8 Hours|
|* Combustible Capacity||30 LBS/HR|
|1||Voltage/Phase/Hertz||120/1/60||Normal||Less Than 3.6 Gal/HR.||Primary Burner Input||75,000 BTU/HR|
|2||Amps||* 5 to 10||Capacity||6 Gal./HR. Ea. Nozzle||Afterburner Input||425,000 BTU/HR|
|3||Min/Max Pressure||30 to 60 PSI||Natural Gas Inlet Pressure||8" to 14" W.C.|
|4||Propane Inlet Pressure||12" to 18" W.C.|
|5||Gas Inlet Pipe Size||1"|
* Varies with the combustible load and size