HOME  BURN OFF OVEN MODEL 3600-RT

TESTIMONIALS

THE ORIGINAL BURN OFF OVENS
Read More

Burn Off Ovens - Model 3600-RT

The ACE burn off oven Model 3600-RT is a popular heat cleaning system for the painting industry. High grade steel of 11 gauge is used for its fabrication, along with high temperature blue enamel paint coat for corrosion resistance. It offers automatic controls, and central heat distribution for optimum balance of heat. Hence, the user simply needs to load the items into the oven, set the requisite parameters and push the ‘on’ button; the oven will take care of the rest. Also, the oven is designed keeping the operator’s safety and comfort in mind.

 

You can further understand about the oven from the technical specifications provided below.

Physical
Component Specifications
Inside Dimensions W/O Cart 96'W X 120"D X 105"H
Inside Dimensions With Cart 96"W X 120"D X 87"H
Volume Over Cart 580 CU. FT.
Single Platform Cart Dimensions 93"W X 117"D X 18'H
Outside Dimensions 121"W 162"D X 118"H
Shipping Weight 9,500 LBS.
Location of Controls Right Side
Location of Exhaust Stack A Top Rear Left Corner
Exhaust Stack I.D.   (2) 18" ID x 10' Included
Exhaust Stack O.D. (2) 22" OD x 10' Included

 

Controls
Component Specifications
Primary Burner – Normal 800°F (427°C)
Afterburner - Before Primary Ignites 1,400°F (742°C)
Over Temp. Control Standard
Primary Water Spray Standard
Secondary Water Spray Standard
NFPA-86A Specifications Optional
FM Specifications Optional
ISO Control Certified Standard
Primary Burner off on Loss of A.B. Standard
Primary Burners Rated For 800,000 BTU/HR
Afterburner Rated for 1,200,000 BTU/HR
Automatic Shutoff System Standard
One Touch Control (OTC) System Optional
High Fire Afterburner 1,500°F(798°C) Optional

 

Construction
Component Specifications
Cart Rating 800 LBS.
Cart 4" Structural Channel 7.25 LBS/FT
Oven Steel Enclosure 11 Ga. CRS
Oven Enclosure Front Face 1/4" CRS Plate
Angle Iron Reinforced Enclosure Standard
Blanket Insulation 4" Thick 2,300°F. Standard
Aluminized Coating Inside Enclosure Standard
Steel Floor Covers Over 4" Insulation 3/16" CRS
Exterior Finish Hi-Temp. Blue Enamel
Exhaust Stack Insulation Rated 2,700°F. 2" Thick
2 Top Mounted Pressure Relief Hatches 46.71 SQ. FT.
Oven Volume 701.67 CU. FT. 1:15.02 Vent Ratio
Qty. Primary Water Nozzles 10 Standard
Qty. Secondary Water Nozzles 10 Standard
Primary Burners 2 Standard
Afterburners 1 Standard
NFPA Preferred Vent Ratio 1:15

 

Cycle Time/Capacity
Component Specifications
*Normal Cycle Time 2 to 8 Hours
*Combustible Capacity 80 LBS/HR
Others
Sr. No. Electric Water Fuel
Component Specifications Component Specifications Component Specifications
1 Voltage/Phase/Hertz 120/1/60 Normal Less Than 3.6 Gal/HR. Primary Burner Input 350,000 BTU/HR
2 Amps * 5 to 10 Capacity 6 Gal./HR. Ea. Nozzle Afterburner Input 350,000 BTU/HR
3     Min/Max Pressure 30 to 60 PSI Afterburner Input 700,000 BTU/HR
4         Natural Gas Inlet Pressure 8" to 14" W.C.
5         Propane Inlet Pressure 12" to 18" W.C.
6         Gas Inlet Pipe Size 1-1/2"
 

*Varies with the combustible load and size

This intelligent design enables the oven to leave minimal residue, as well as fewer gas and smoke emissions. Hence, the environmental impact is minimal, adding to its popularity.