HOME  CURING OVENS  FEATURES & SPECIFICATIONS

TESTIMONIALS

THE ORIGINAL BURN OFF OVENS
Read More

ACE Bench Curing Ovens

ACE bench curing ovens are primarily used for the following processes – preheating plastics, curing potting compounds, drying powdered metals and small components, heating bearings and processing large parts. The processes include – curing, baking, preheating, dehydration, and drying components after cleaning.

Features

  • Standard features of ACE bench curing ovens include:
    • On-Off switch
    • Recirculating blower
    • Silicone rubber door gasket
    • Baked enamel exterior finish
    • Calibrated temperature controller
    • Red pilot light indicating heater operation
    • Manual reset excess temperature controller
    • Six lb./cf density industrial rockwool insulation
    • Energy efficient direct fire burners
    • ODP electric motors
    • Duct work designed to avoid direct air impingement
    • FM or IRI insurance-approved controls
    • Automatic shutdown
    • Aluminized steel six-inch insulated panels for oven walls and ceilings
  • The oven can be also used for miscellaneous applications that require circulation of heated air.
  • These portable ovens can be easily shifted and installed in different locations.
  • ACE ovens are factory tested, and are provided with a 1 year warranty.
  • The oven exterior is constructed using high-grade welded steel.
  • The oven interior is constructed using 430 stainless steel. This steel grade provides benefits of formability, ductility, and corrosion resistance.
  • The internal heating elements are designed as sheathed tubes. They are manufactured using Incoloy, a nickel based super alloy. Incoloy is known for its high strength and corrosion resistant properties.
  • The oven is designed to incorporate shelves. It can hold a maximum capacity of seven shelves.
  • Two removable nickel-plated wire shelves are also provided with the oven that ensure easy adjustment.
  • These ovens are not designed for applications that consist of flammable solvents and vapors. ACE can provide you specialized models to meet this need.

Specifications

  • Maximum Operating Temperature: 500° F
  • Workspace Dimensions (W x D x H):
    • From 26″ x 22″ x 16″ to 28″ x 24″ x 18″
  • Outside Dimensions (W x D x H):
    • 41″ x 30″ x 23″
  • Volume (Cubic Ft.) Options:
    • 7
    • 5.3
    • 4.8
  • Temperature Range: 350°F to 550°F
  • Insulation Range: 2″ to 3″
  • Voltage Options:
    • 208 Volts, 1-phase, 60 Hz
    • 230 Volts, 1-phase, 60 Hz
    • 115 Volts, 60 Hertz, 3-wire cord with plug
  • Watts: The wattage is divided by the voltage specifications
    • From 2000 to 3000
  • Operational Characteristics
    • Control Accuracy Temperature: 10°F
    • Oven Uniformity Temperature Range: From 10°F to 25°F
    • Rise Time:
      • Between 17 and 32 minutes