HOME  BURN OFF OVENS MODEL 496 RT

TESTIMONIALS

THE ORIGINAL BURN OFF OVENS
Read More

Burn Off Ovens - Model 496-RT

The ACE Burn Off oven 496-RT model is fuel efficient and built to last. Manufactured in compliance to ISO standards, NFPA-86A and FM specifications, the oven provides safety and reliability in demanding industrial application environments. Normal cycle time of this oven is 2 to 8 hours, and combustible capacity is 40 LBS/HR. (The cycle time and capacity varies with the combustible load and oven size).

The primary burner of 496-RT oven is designed to operate at 800°F (427°C), and the afterburner at 1,400°F (742°C). Both these burners ensure complete cleaning of parts, minimizing any secondary cleaning operation. It is fully automated, providing substantial savings on time and labor costs. The ACE 496-RT oven is widely used across industries to remove grease, adhesives, varnish, powder coating, epoxy, and paint, among others.

 

 

Physical
Component Specifications

Inside Dimensions W/O Cart

48"W x 48"D x 83"H

Inside Dimensions With Cart

48"W x 48"D x 69"H

Volume Over Cart

92 CU. FT.

Single Platform Cart Dimensions

45"W x 45"D x 14"H

Outside Dimensions

71"W x 78"D x 96"H

Shipping Weight

3,700 LBS.

Location of Controls

Right Side

Location of Exhaust Stack

Top Rear Left Corner

Exhaust Stack

12" ID x 10' Included

Exhaust Stack

16" OD x 10" Included

 

Controls
Component Specifications

Over Temp. Control

Standard

NFPA-86A Specifications

Optional

Primary Water Spray

Standard

Secondary Water Spray

Standard

FM Specifications

Optional OA-2600

ISO Control Certified

Standard

Primary Burner off on Loss of A.B.

Standard

Automatic Shutoff System

Standard

One Touch Control (OTC) System

Optional

High Fire Afterburner 1,500°F (798°C)

Optional

 

Construction
Component Specifications

Cart Rating

800 LBS.

Cart 3" Structural Channel

5 LBS/FT

Oven Steel Enclosure

11 Ga. CRS

Oven Enclosure Front Face

1/4" CRS Plate

Angle Iron Reinforced Enclosure

Standard

Blanket Insulation 4" Thick 2,300°F.

Standard

Aluminized Coating Inside Enclosure

Standard

Steel Floor Covers Over 4" Insulation

3/16" CRS

Exterior Finish Hi-Temp.

Blue Enamel

Exhaust Stack Insulation Rated

2,700°F. 2" Thick

1 Top Mounted Pressure Relief Hatch

7.56 SQ. FT.

Oven Volume 83.00 CU. FT.

1:14.64 Vent Ratio

Qty Primary Water Nozzles

2 Standard

Qty Secondary Water Nozzles

4 Standard

Qty Primary Burners

1 Standard

Qty Afterburners

1 Standard

 

Sr. No. Electric Water Fuel
Component Specifications Component Specifications Component Specifications
1

Voltage/Phase/Hertz

120/1/60

Normal

Less Than 3.6 Gal/HR.

Primary Burner Input

100,000 BTU/HR

2

Amps

* 5 to 10

Capacity

6 Gal./HR. Ea. Nozzle

Afterburner Input

425,000 BTU/HR

3

 

 

Min/Max Pressure

30 to 60 PSI

Natural Gas Inlet Pressure

8" to 14" W.C.

4

 

 

 

 

Propane Inlet Pressure

12" to 18" W.C.

5

 

 

 

 

Gas Inlet Pipe Size

1"