HOME  BURN OFF OVENS - MODEL 472-RT

TESTIMONIALS

THE ORIGINAL BURN OFF OVENS
Read More

Burn Off Ovens - Model 472-RT

The ACE Burn Off oven model 472-RT can best handle your industrial cleaning and stripping needs. The model is safe, reliable, and built to last. It is designed with primary and secondary water spray system. This feature largely contributes in keeping smoke emission rate to a minimum. The water spray system prevents furnace overheating, which may otherwise lead to material damage.

The primary burner of 472-RT oven is capable of heating the cleaning chamber up to 800°F (427°C). The afterburner can operate at 1,400°F (742°C). Due to these high temperatures, parts are cleaned thoroughly, eliminating any secondary cleaning operation. Normal cycle time of this model is 2 to 8 hours, and combustible capacity is 40 LBS/HR.

 

Depicted below are the detailed specifications of 472-RT burn off oven.

Physical
Component Specifications
Inside Dimensions W/O Cart 36"W x 48"D x 83"H
Inside Dimensions With Cart 36"W x 48"D x 69"H
Volume Over Cart 69 CU. FT.
Single Platform Cart Dimensions 33"W x 45"D x 14"H
Outside Dimensions 56"W x 76"D x 96"H
Shipping Weight 3,500 LBS.
Location of Controls Right Side
Location of Exhaust Stack Top Rear Left Corner
Exhaust Stack 10" ID x 10' Included
Exhaust Stack 14" OD x 10' Included

 

Controls
Component Specifications
Over Temp. Control Standard
NFPA-86A Specifications Optional
Primary Water Spray Standard
Secondary Water Spray Standard
FM Specifications Optional OA-2600
ISO Control Certified Standard
Primary Burner off on Loss of A.B. Standard
Automatic Shutoff System Standard
One Touch Control (OTC) System Optional
High Fire Afterburner 1,500°F (798°C) Optional

 

Construction
Component Specifications
Cart Rating 800 LBS.
Cart 3" Structural Channel 5 LBS/FT
Oven Steel Enclosure 11 Ga. CRS
Oven Enclosure Front Face 1/4" CRS Plate
Angle Iron Reinforced Enclosure Standard
Blanket Insulation 4" Thick 2,300°F. Standard
Aluminized Coating Inside Enclosure Standard
Steel Floor Covers Over 4" Insulation 3/16" CRS
Exterior Finish Hi-Temp. Blue Enamel
Exhaust Stack Insulation Rated 2,700°F. 2" Thick
1 Top Mounted Pressure Relief Hatch 5.96 SQ. FT.
Oven Volume 83.00 CU. FT. 1:13.93 Vent Ratio
Qty Primary Water Nozzles 2 Standard
Qty Secondary Water Nozzles 4 Standard
Qty Primary Burners 1 Standard
Qty Afterburners 1 Standard

 

Sr. No. Electric Water Fuel
Component Specifications Component Specifications Component Specifications
1 Voltage/Phase/Hertz 120/1/60 Normal Less Than 3.6 Gal/HR. Primary Burner Input 75,000 BTU/HR
2 Amps * 5 to 10 Capacity 6 Gal./HR. Ea. Nozzle Afterburner Input 425,000 BTU/HR
3     Min/Max Pressure 30 to 60 PSI Natural Gas Inlet Pressure 8" to 14" W.C.
4         Propane Inlet Pressure 12" to 18" W.C.
5         Gas Inlet Pipe Size 1"