Products
Burn Off Ovens - Model 3416 RT
The ACE burn off Oven Model 3416 RT is an industrial heat cleaning oven designed to get rid of hydrocarbon coatings from metal parts. The oven features completely automatic controls, which help reduce labor and errors. This oven is made from sturdy 11 gauge steel, and is painted with anti-corrosive, and temperature resistant blue enamel paint. The automatic One Touch Control system (OTC) allows for easy monitoring of combustible vapors in the oven. The model 3416’s construction adheres to UL and ISO standards. We can also design these ovens to adhere NFPA and FM specifications.
For more details, please peruse the specification tables given below.
| Physical | |
| Component | Specifications |
| Inside Dimensions W/O Cart | 96"W x 96"D x 93"H |
| Inside Dimensions With Cart | 96"W x 96"D x 75"H |
| Volume Over Cart | 400 CU. FT. |
| Single Platform Cart Dimensions | 93"W x 93"D x 18"H |
| Outside Dimensions | 125"W x 143"D x 106"H |
| Shipping Weight | 8,000 LBS. |
| Location of Controls | Right Side |
| Location of Exhaust Stack | Top Rear Left Corner |
| Exhaust Stack | 16" ID x 10' Included |
| Exhaust Stack | 20" OD x 10' Included |
| Controls | |
| Component | Specifications |
|
Primary Burner - Normal |
800°F (427°C) |
|
Afterburner - Before Primary Ignites |
1,400°F (742°C) |
|
Over Temp. Control |
Standard |
|
Primary Water Spray |
Standard |
|
Secondary Water Spray |
Standard |
|
NFPA-86A Specifications |
Optional |
|
FM Specifications |
Optional OA-2600 |
|
U.L. Listed Control Panel |
Standard |
|
ISO Control Certified |
Standard |
|
Primary Burner off on Loss of A.B. |
Standard |
|
*Primary & A.B. Burners Rated For |
800,000 BTU/HR |
|
Automatic Shutoff System |
Standard |
|
One Touch Control (OTC) System |
Optional |
|
High Fire Afterburner 1,500°F (798°C) |
Optional |
| Construction | |
| Component | Specifications |
| Cart Rating | 8,000 LBS. |
| Cart 4ʺ Structural Channel | 7.25 LBS/FT |
| Oven Steel Enclosure | 11 Ga. CRS |
| Oven Enclosure Front Face | 1/4ʺ CRS Plate |
| Angle Iron Reinforced Enclosure | Standard |
| Blanket Insulation 3ʺ Thick 2,300°F. | Standard |
| Aluminized Coating Inside Enclosure | Standard |
| Steel Floor Covers Over 4ʺ Insulation | 3/16ʺ CRS |
| Exterior Finish Hi-Temp. | Blue Enamel |
| Exhaust Stack Insulation Rated | 2,700°F. 2ʺ Thick |
| 2 Top Mounted Pressure Relief Hatch | 33.25 SQ. FT. |
| Oven Volume 497.33 CU. FT. | 1:14.96 Vent Ratio |
| Qty. Primary Water Nozzles | 8 Standard |
| Qty. Secondary Water Nozzles | 6 Standard |
| Qty. Primary Burners | 2 Standard |
| Qty. Afterburners | 1 Standard |
| NFPA Preferred Vent Ratio | 1:15 |
| Cycle Time/Capacity | |
| Component | Specifications |
| *Normal Cycle Time | 2 to 8 Hours |
| *Combustible Capacity | 70 LBS/HR |
* Varies with combustible load and oven size.
| Others | ||||||
| Sr. No. | Electric | Water | Fuel | |||
| Component | Specification | Component | Specification | Component | Specification | |
| 1 | Voltage/Phase/Hertz | 120/1/60 | Normal | Less Than 3.6 Gal/HR. | Max Primary Burner 1 Input | 300,000 BTU/HR |
| 2 | Amps | *5 to 10 | Capacity | 6 Gal./HR. Ea. Nozzle | Max Primary Burner 2 Input | 300,000 BTU/HR |
| 3 | Min/Max Pressure | 30 to 60 PSI |
Avg. Primary & Afterburner Total Hi-Lo Input Natural Gas Inlet Pressure |
8ʺ to 14ʺ W.C. | ||
| 4 | Propane Inlet Pressure | 12ʺ to 18ʺ W.C. | ||||
| 5 | Gas Inlet Pipe Size | 1-1/4" | ||||
*ACE provides a 1 year warranty from the date of sale, to repair, or replacement of any defective part. The warranty is applicable only if the oven is installed, maintained, and operated as per ACE’s recommendations. Any deviation from recommended installations may result in changes to the above-mentioned date.
