HOME  BURN OFF OVEN MODEL 31453-RT

TESTIMONIALS

THE ORIGINAL BURN OFF OVENS
Read More

Burn Off Ovens - Model 31453 RT

The ACE Burn Off oven model 31453-RT is a contemporary heat cleaning system. It is generally used to remove combustible materials from numerous industrial parts and products, including racks, hooks, and fixtures. The model consists of burners that are capable of reaching temperatures over 800°F. The oven ensures that the parts are cleaned thoroughly, and all contaminants are eliminated. In terms of inner and outer dimensions, it is the biggest oven manufactured by Armature Coil Equipment. Thus, users can utilize it for cleaning parts and components of large sizes and shapes.

 

The technical specifications of this model are given in detail in the tables below.

Physical
Component Specifications
Inside Dimensions W/O Cart 120"W x 192"D x 125"H
Inside Dimensions With Cart 120"W x 192"D x 108"H
Volume Over Cart 1440 CU. FT.

Single Platform Cart Dimensions

116"W x 188"D x 17"H
Outside Dimensions 173"W x 235"D x 138"H
Shipping Weight 30,000 LBS.
Location of Controls Right Side
Location of Exhaust Stack A Top Rear Left Corner
Location of Exhaust Stack B Center Left Side
Exhaust Stack I.D.   (2) 18"
Exhaust Stack O.D. (2) 22"

 

Controls
Component Specifications
Primary Burner - Normal 800°F (427°C)
Afterburner - Before Primary Ignites 1,000°F (538°C)
Over Temp. Control Standard
NFPA-86A Specifications Optional
Primary Water Spray Standard
Secondary Water Spray Standard
FM Specifications Optional OA-2600
ISO Control Certified Standard
Primary Burner off on Loss of A.B. Standard
Primary & A.B. Burners Rated For 1,200,000 BTU/HR
Automatic Shutoff System Standard
One Touch Control (OTC) System Optional
High Fire Afterburner 1,500°F(798°C) Optional

 

Construction
Component Specifications
Cart Rating 8,000 LBS.
Cart 3" Structural Channel 7.25 LBS/FT
Oven Steel Enclosure 11 Ga. CRS
Oven Enclosure Front Face 1/4" CRS Plate
Angle Iron Reinforced Enclosure Standard
Blanket Insulation 4" Thick 2,300°F. Standard
Aluminized Coating Inside Enclosure Standard
Steel Floor Covers Over 4" Insulation 3/16" CRS
Exterior Finish Hi-Temp. Blue Enamel
Exhaust Stack Insulation Rated 2,700°F. 2" Thick
Top Mount Pressure Relief Hatches(4) 110.4 SQ. FT.
Oven Volume 1,667 CU. FT. 1:15.10 Vent Ratio
Qty. Primary Water Nozzles 24 Standard
Qty. Secondary Water Nozzles 20 Standard
Qty. Primary Burners 3 Standard
Qty. Afterburners 2 Standard
NFPA Preferred Vent Ratio 1:15

 

Cycle Time/Capacity
Component Specifications
*Normal Cycle Time 2 to 8 Hours
*Combustible Capacity 100 LBS/HR

 

Sr. No. Electric Water Fuel
Component Specifications Component Specifications Component Specifications
1 Voltage/Phase/Hertz 120/1/60 Normal Less Than 20 Gal/HR. Max Prim. Burner Hi-Fire Input (3) 975,000 BTU/HR
2 Amps * 15 to 20 Capacity 6 Gal./HR. Ea. Nozzle Max After-burner Hi-Fire Input (2) 1,900,000 BTU/HR
3     Min/Max Pressure 30 to 50 PSI Avg. Prim & After. Total Hi-Lo Input 2,156,250 BTU/HR
4         Natural Gas Inlet Pressure 8" to 14" W.C.
5         Propane Inlet Pressure 12" to 18" W.C.
6         Gas Inlet Pipe Size 3"

 

* Varies with the combustible load and size

Armature Coil Equipment can design the oven to meet regulations of various standards and certifications including ISO, UL, as well as FM, and NFPA (optional).